Guarantee & Service - Philips Philishave 1000 Serie Mode D'emploi

Masquer les pouces Voir aussi pour Philishave 1000 Serie:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Environment
Remove the battery when you discard the appliance. Do not throw the
battery away with the normal household waste, but hand it in at an
official collection point. You can also take the appliance to a Philips
service centre, which will remove the battery for you and will dispose
of it in an environmentally safe way.
Only remove the battery if it is completely empty.
1
Disconnect the appliance from the mains and let the appliance
run until the motor stops.
2
Push the middle part of the cutting unit upwards with your
thumb until it opens and then pull it off the appliance (fig. 10).
Be careful that the cutting unit does not fall to the floor.
3
Remove the upper housing part from the inner part of the
appliance by means of a screwdriver (fig. 14).
4
Separate the lower housing part from the appliance (fig. 15).
5
Remove the result indicator from the appliance (fig. 16).
6
Remove the battery by prying it out of the appliance (fig. 17).
7
Cut the wires and dispose of the battery in an environmentally
safe way.
Guarantee & service
If you need information or if you have a problem, please visit the Philips
website at www.philips.com or contact the Philips Customer Care
Centre in your country (you will find its phone number in the
worldwide guarantee leaflet). If there is no Customer Care Centre in
your country, turn to your local Philips dealer or contact the Service
Department of Philips Domestic Appliances and Personal Care BV.
ENGLISH
11

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Philishave qc5090Philishave qc5070Philishave qc5070/00

Table des Matières