hjh OFFICE COMPACT III Mode D'emploi page 8

MOUNTING METHOD
• Select a stable, dry and secure locaFon for your safe.
• If bolFng to a wall, make sure that your safe is resFng on a supporFng surface (such as the
floor or a shelf). Do not bolt your safe to both the floor and wall.
1. Place the safe on the selected location. Use a pencil to mark the mounting holes on the floor or
wall.
2. Move the safe and drill 2-inch-deep mounting holes (~50 mm) using the appropriate drill bit.
3. Move the safe back in place, align the mounting holes to the openings in the safe. Insert the
expansion bolts (included) through the holes and into the mounting holes and tighten them
securely.
For any help, kindly consult the local distributor
EN
2