Model Description - Ovention F1400 Manuel D'installation Et D'utilisation

IMPORTANT SAFETY INFORMATION
NOTICE
Use non-abrasive cleaners and cloths only. Abrasive
cleaners and cloths could scratch finish of unit, marring its
appearance and making it susceptible to soil accumulation.

MODEL DESCRIPTION

Ovention F1400 Finishing Ovens are designed to provide
®
unequaled flexibility in both kitchen and front-of-the-house
installations.
The F1400 Finishing Oven is a standard, single belt finishing
conveyor oven. It has a 14" (356 mm) conveyor belt that can
be set to move from left-to-right or right-to-left. The conveyor
belt moves product continuously from one side of the conveyor,
through the oven chamber, to the opposite side of the conveyor.
The oven is equipped with dedicated upper and lower infrared
heating elements to provide complete and flexible finishing of
food product.
Conveyor Assembly
Conveyor Belt
Conveyor
End Stop
Crumb Tray
Left Side of
Adjustable
Door Tunnel
USB Port
Power I/O
Switch
Do not lay unit on front or back side. Damage to unit could
occur.
Clean unit daily to avoid malfunctions and maintain sanitary
operation.
Operator controls consist of a Touchscreen Control and a
Power I/O (on/off) switch. Adjustable door tunnels on each side
of the oven chamber can be used to customize the chamber
opening height. Four removable crumb trays/drawers allow
for easy cleanup; one below each side of the conveyor, and
one below each oven chamber opening. A USB port allows the
uploading of pre-programmed menu items and installation of
software updates. A 6' (1829 mm) cord and plug set is standard.
Oven Chamber
Touchscreen
Control
4
English
NOTICE
Right Side of
Conveyor Assembly
Conveyor
End Stop
Belt Guard
OVFM-0422