Berger & Schroter SG880MK-8mHD Mode D'emploi page 32

Setting Items
Language
Camera Mode
Set Clock
Photo Size
Photo Burst
Video Size
Video Length
Time Lapse
Description
You can choose language you need. It supports four
language: English, Finnish, German, Swedish
Choose capturing images or recording videos.
Set camera date and time.You can change the date
and time of the device by setting this parameter
when necessary, e.g., after every battery change.
The date format is month/day/year, the time format
is hour: minute: second. The valid value for year is
between 2009 and 2050.
Choose the image size, e.g. 8 mega pixels or 5
mega pixels.
Choose the continuous shooting numbers after
each triggering.
Choose the video size: 1280x720 or 640x480.
Choose duration of recording video. This parameter
is effective and can be adjusted only when the
device in the video mode under ON mode. Its value
extends from 1 to 60 seconds with a step of one
second. The default value is 10 seconds. Press
LEFT and RIGHT to decrease or increase the value
by 1 second.
Time lapse means the camera can capture images
or videos at a preset time interval regardless of
whether motions are detected. The default
parameter is Off, which means the timer function is
disabled. Changing this parameter to a non-zero
value turns on the Time Lapse mode, and camera
will take photos at given time interval.
Please note that if the PIR Trigger is set to Off,
then the Time Lapse can't be set to Off.
32