Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Floor Mounting
Rear position
Front position
Wall Mounting
5. Using the Phillips screwdriver, mount anti-tip bracket to the
6. Move range close enough to opening to allow for final
7. Move range into its final location, making sure rear leveling
Diagonal (2 options)
8. Move range forward onto shipping base, cardboard or
wall or floor with the two #12 x 1⁵⁄₈" screws provided.
electrical connections. Remove shipping base, cardboard or
hardboard from under range.
leg slides into anti-tip bracket.
hardboard to continue installing the range using the following
installation instructions.
7
Publicité
Table des Matières
