Test Mode; Viewing And Deleting Images - Stealth Cam PX Serie Manuel D'instructions

Test Mode

This setting is used to test the camera's PIR sensor coverage area.
When in test mode, the green LED on the front of the camera will blink
GREEN when the camera detects motion. Use this mode to determine
if camera placement will capture desired movement.

Viewing and Deleting Images

There are a few methods for viewing and deleting your files.
i. Using an SD Memory Card Reader/Viewer: You will simply
need to remove the SD card from the camera and insert it into
the reader to view the files; you can also delete them from this
device.
ii. Using your computer: This method requires an SD card slot to
be installed to your computer. Please refer to your computer's
Owner's Manual for the proper way of viewing the files.
iii. Obtain a mobile device adapter: This will allow you to plug one
end into the device, and, at the other end, insert the SD card.
Please refer to the vendor's User Manual for the proper way of
viewing the files.
Page 11