Stealth Cam PX Serie Manuel D'instructions page 10

Camera Configuration cont.
DATE: This setting is used by the camera to display
the correct date on the Info Bar of the image.
TIME: This setting is used by the camera to display
the correct time on the Info Bar of the image.
MODE: This setting will change the operation
mode of the camera. Different operation modes will
have different adjustment settings
OPTIONS: Photo | Video
DELAY: This setting is used to determine how long
the camera will wait before reinitializing the PIR
sensor after taking a photo.
OPTIONS: 5 sec | 10 sec | 15 sec | 30 sec |
60 sec | 120 sec
PHOTO BURST: This setting determines how
many photos are taken each time the camera is
activated.
OPTIONS: 1 photo – 6 photos
Note: This setting is only applicable in photo
mode.
RESOLUTION: This setting will determine the
quality of each image. A higher quality will result in
better photos and take more memory space.
OPTIONS: Low | Medium | High
Note: This setting is only applicable in photo
mode.
VIDEO LENGTH: This setting is used to determine
the length of time, in seconds, of a video recording
OPTIONS: 5 sec | 15 sec | 30 sec
Note: This setting is only applicable in video
mode.
FACTORY RESET: This option will reset the
camera to its factory defaults. This will erase any
CUSTOM camera setup present.
OPTIONS: Yes | No
DELETE SD: This setting is used to format the SD
memory card installed. Formatting your SD card
will ERASE ALL DATA PRESENT. To format card,
change setting to Yes and press Enter.
NOTE: After card is formatted it is impossible to
restore data that was present on card.
QUIT: Pressing Enter on this setting will allow you
to exit the camera configuration menu and return
your camera to a ready state.
Page 10