Device Description; Initial Use - Beurer BARBERS CORNER HR 7000 Mode D'emploi

6. Device description

3
12
11
1. Shaving foil
2. Long hair cutter
3. Shaving foil release buttons
4. Triple-blade shaving system
5. ON/OFF switch
6. Battery indicator (0-100%)
7. Travel lock indicator
8. Charge indicator

7. Initial use

You can operate the device using the battery or the mains adapter supplied.
Charging the battery
You must fully charge the battery for approx. 90 minutes before the first use. The operating period of the device is ap-
prox. 60 minutes when it is fully charged.
To charge the battery, proceed as follows:
1. Ensure that the device is switched off before charging the battery.
2. Connect the mains adapter to a suitable socket.
3. Plug the other end of the mains adapter into the connection socket on the underside of the device. The charge indicator
will now flash in the display and the charging status indicator lights up white. The charging process will be displayed by
the flashing charging status indicator and the illuminated charge indicator. If the battery is fully charged, the charging
status indicator lights up continuously. You can see the precise battery charge level from the battery indicator.
4. Once the charging process is complete, pull the mains adapter out of the socket and the device.
2
1
5
10
4
12
6
7
9. Maintenance indicator
10. Connection socket
11. Detail trimmer
12. Shaver unit release buttons
13. Cleaning brush
14. Protective cap/three-day stubble attachment
15. Mains adapter
16. Storage bag
16
13
14
15
16