ASROCK G43Twins-FullHD Mode D'emploi page 15

Table des Matières

Les langues disponibles

2.3 Installation of Memory Modules (DIMM)

This motherboard provides two 240-pin DDR2 (Double Data Rate 2) DIMM slots

and two 240-pin DDR3 (Double Data Rate 3) DIMM slots, and supports Dual

Channel Memory Technology. For dual channel configuration, you always need

to install identical (the same brand, speed, size and chip-type) DDR2/DDR3

DIMM pair in the slots of the same color. In other words, you have to install

identical DDR2 DIMM pair in Dual Channel A (DDRII_1 and DDRII_2; Yellow

slots; see p.2 No.4) or identical DDR3 DIMM pair in Dual Channel B (DDR3_A1

and DDR3_B1; Green slots; see p.2 No.5), so that Dual Channel Memory Technol-

ogy can be activated. You may refer to the Dual Channel Memory Configuration

Table below.

Dual Channel DDR2 Memory Configurations

(DS: Double Side, SS: Single Side)

2 memory modules SS

2 memory modules DS

Dual Channel DDR3 Memory Configurations

(DS: Double Side, SS: Single Side)

2 memory modules SS

2 memory modules DS

If you want to install two memory modules, for optimal compatibility

and reliability, it is recommended to install them in the slots of the

same color. In other words, install them in the set of yellow slots

(DDRII_1 and DDRII_2), or in the set of green slots

(DDR3_A1 and DDR3_B1).

If you install only one memory module or two non-identical memory

modules, it is unable to activate the Dual Channel Memory Technology.

It is not allowed to install a DDR3 memory module into DDR2 slot or

install a DDR2 memory module into DDR3 slot; otherwise, this

motherboard and DIMM may be damaged.

DDR2 and DDR3 memory modules cannot be installed on this

motherboard at the same time.

ASRock G43TwinsFullHD Motherboard

DDRII_1

DDRII_2

(Yellow Slot)

DDR3_A1

DDR3_B1

(Green Slot)

1 5

Table des Matières