Publicité
Les langues disponibles
Les langues disponibles
Liens rapides
S1
TRUE
WIRELESS
GETTING STARTED FOR KLIPSCH S1 TRUE WIRELESS
INITIAL SET UP AND PAIRING:
1. Turn on the earphones by holding down the touch buttons (over the logo) on
both earphones for 3 seconds.
2. Once they are turned on you will hear a prompt indicating that the Left and the
Right Channels have been connected to each other.
3. Now it is time to pair them to your phone. Open up the Bluetooth connection
menu of your smartphone or tablet. Connect to "S1" or "Klipsch S1 True
Wireless". If it does not connect right away wait 5 seconds and try again.
4. Once connected the earphones will recognize your device and will
automatically connect to it every time they are powered on in the future.
AUTO POWER ON/OFF:
There are 2 ways to power on the earphones:
1. If they are in the charging case simply remove the earphones without touching
the touch buttons to auto power on the earphones.
2. If they are not in the charging case or the case has run of power, press the
touch buttons on both earphones for 3 seconds to power on.
There are 2 ways to power off the earphones:
1. To auto power off place the earphones back into the charging case. After 5
seconds the earphones will automatically turn off and begin the charging
process. These features may not work if the charging case has been fully
depleted of power.
2. To manually power off press and hold the touch button over the logo of the
earphone for 3-5 seconds.
CHARGING THE EARPHONES:
1. To charge the earphones simply place them into the corresponding areas of the
charging case. Make sure they are securely in the correct position.
2. Close the lid.
3. The red indicator lights will turn on to indicate that they are charging. When
charging is complete the red lights will turn off. The blue indicator lights on the
charging case show the current power level remaining in the charging case.
CHARGING THE CASE:
1. To charge the power case plug in the included micro USB cable to the rear of the
case. Then plug the other end into a power source such as a computer or a USB
wall charger.
2. Charging is complete when all 4 LED lights are solid blue.
3. This is also compatible with wireless charging.
4. Simply place the charging case with the Klipsch brand facing upward on to a
powered wireless charging pad and charging will automatically begin.
Publicité
Manuels Connexes pour Klipsch S1
Sommaire des Matières pour Klipsch S1
- Page 1 2. Charging is complete when all 4 LED lights are solid blue. 3. This is also compatible with wireless charging. 4. Simply place the charging case with the Klipsch brand facing upward on to a powered wireless charging pad and charging will automatically begin.
- Page 2 A: Turn on the earphones and check the name of the Bluetooth connection on your smart device. This connection name directly relates to the product code of your earphones. For example, if your connection is “S1” or “Klipsch S1 True Wireless” then your earphone model number is S1.
- Page 3 3. Maintenant, il est temps de les connecter à votre appareil mobile. Ouvrez le menu de connexion Bluetooth sur votre téléphone intelligent ou tablette. Connectez-vous à ‘S1’ou ‘Klipsch S1 True Wireless.’ Si la connexion ne s’effectue pas immédiatement, attendez 5 secondes puis réessayez.
- Page 4 R : Allumez les écouteurs et vérifiez leur nom sur la page de connexion Bluetooth de votre appareil électronique. Ce nom est lié directement au modèle/code de vos écouteurs. Par exemple, si le nom Bluetooth de vos écouteurs est ‘S1’ ou ‘Klipsch S1 True Wireless’, alors le modèle de vos écouteurs est S1.