PALSON X3 Mode D'emploi page 9

Blade and battery life
The useful life of the blade will vary depending on the frequency and time of use. The estimated life of the blades is 6 years, if the hair
clippers are used twice a month for 20 minutes each time. If cutting is considerably less efficient, in spite of proper maintenance, it means
that the blades have exceeded their useful life and need to be replaced.
The useful life of the battery will vary depending on the frequency and time of use. If the battery is charged 3 times a month, the useful
life will be approximately 6 years. If the appliance is left for six months without charging, the battery will lose its charge and its useful life
may be shortened.
Therefore, even if it is not used regularly, we recommend charging the unit at least once every six months.
Looking after the blade
Please clean the blade after using it to look after it properly.
1. Turn the switch to "O" (off) and unplug the appliance from the mains.
2. Remove the blade.
3. Hold the hair clippers' blade and remove the upper part of the blade from the appliance. (Fig. 2)
4. Please, take care with the blade as you could cut yourself.
5. Use the cleaning brush to clean the blade and the appliance (Figs. 6, 7 and 8).
6. Apply oil to the parts marked with an arrow (Fig. 9).
7. Insert the blade.
Thank you for choosing one of our products.
9