Mounting And Removing Flat Panel Screen - Peerless Industries PLA 60-UNL Installation Et Montage

Mounting and Removing Flat Panel Screen

• Always use an assistant or mechanical lifting equipment to safely lift and position the plasma television.
Refer to mount instruction sheet for attachment of adapter bracket to mount.
Hook adapter brackets (BB or CC) onto adapter bracket (AA), then slowly swing screen in as shown. Turn screws
8
clockwise at least six times to prevent screen from being removed as shown in detail 4. Tighten using allen wrench (DD).
Screen can be adjusted horizontally if desired.
Note: To lock the screen down, tighten screws to adapter bracket as shown in detail 4.
To remove screen from mount, loosen screws, swing screen away from mount, and lift screen off of mount.
AA
SCREWS
BB or CC
BB
or
CC
DETAIL 4
WARNING
AA
13 of 42
ISSUED: 06-05-06 SHEET #: 202-9141-7 05-06-08