Applying Labels To The Controllers
The analog Contrio controllers allow you to remove the window lens overlay so
you can apply labels to the window insert beneath it.
To apply labels to an analog controller:
1. Carefully pull the knob straight off.
2. Hold the controller upside down in the
palm of one hand. With the fingernails
of the other hand, press and release
the tab closest to the pot first and
then press and release the other tab,
allowing the insert and overlay to fall
into the palm of the hand holding the
controller.
3. Remove the window insert from the
window lens overlay then affix labels
to the window insert.
4. Place window insert back into
window lens overlay and insert the
tab furthest from the pot into the slot
first, then insert the tab closest to the
pot so that the lens clicks into place.
5. Place the knob back on the pot shaft,
ensuring to align the flat side of the
knob with the flat side of the pot shaft.
6
2nd
1st
CD
iPOD
INT RADIO
TV
BAND
1st
CD
CD
iPOD
iPOD
INT RADIO
INT RADIO
TV
TV
BAND
BAND
2nd