Connections
The analog Contrio controllers have 2 terminals: one which carries the voltage
for source or level control (depending on controller type) and one for ground
(or common). The below diagram shows how a single controller would be
connected to the Control Input ports for control over port 1. Each Soundweb
London chassis can support connections of up to twelve analog Contrio
controllers.
Analog Controller Connection Diagram
NOTE: The Soundweb device must be configured for 2-wire mode when using
the analog Contrio controllers. This is the default mode.
4
Contrio Controller Terminal
Soundweb GPIO Ports
Ground
Source or Level