Denver MRD-166 Manuel D'utilisation Et D'instructions page 5

6. To finish encoding/recording, press the stop
return to PHONO mode.
NOTE:
The recording speed is 1:1. Recording time is governed by how long it takes for the
music to play to its end.
The recording format is preset at the MP3 bit rate of 128 Kbps.
CD & Cassette Operation
1. Press the VOLUME knob to turn the equipment on.
2. Choose the mode you wish to use (CD or Cassette)
3. Start playback of the music
The USB Port and SD Card Slot
Playback of music in MP3/WMA format via USB device or memory card
The system is able to decode and playback all MP3/WMA files stored in the memory
media connected to the USB port or SD/MMC card slot.
1. Press the VOLUME knob to turn on the equipment.
2. Set the function selector to CD/USB/SD mode. (If you have both a USB device and a
memory card inserted, press the same button to toggle between CD/USB and SD
mode.) The system will start reading the storage medium automatically after mode
selection and will display the total number of folders and MP3/WMA files.
3. The system will then start audio playback from the media storage device (USB or SD
card) automatically.
The auxiliary input
1. Press the VOLUME knob to turn the equipment on.
2. Use the function selector to select AUX mode, then connect the external audio device
(such as a CD player) to the AUX IN socket on the front of the equipment. The audio
signal from the external audio device will now be played through the system.
button. The display will show "END" and
5