Palm Connect USB Kit Guide Rapide page 7

PC installation instructions
1.
Turn on your computer.
2.
Install the Palm™ Desktop software.
Note: You must install the Palm™ Desktop software before you install the
PalmConnect
other organizer software instead of Palm Desktop software, you still need to
complete this process to install HotSync
Important! Make sure the PalmConnect USB to serial port adapter is NOT
connected to your PC. Wait until you are instructed to connect it in step 4.
• If Palm Desktop 3.0 or later is already installed on your PC, skip to step 3.
• Insert the Palm Desktop CD-ROM that came with your handheld and follow the
onscreen instructions.
Note: The installer will prompt you to connect the cradle to the serial port on your
PC and choose a Com port. These steps are optional since the PalmConnect
USB to serial port adapter and software use a USB port.
3.
Insert the PalmConnect USB CD-ROM into the CD-ROM drive on your PC.
4.
Make the connection.
• Connect the USB to serial port adapter to
your cradle connector (or HotSync Cable).
• Connect the USB to serial port adapter
to the USB port on your PC.
Note: The AC adapter is only
required for Palm V™
organizer users.
® USB software. Even if you are using Microsoft Outlook or
® Manager.
5