Milwaukee L4 HBLB Notice Originale page 2

TECHNICAL DATA HEATED BASE LAYER
Run time high/low...................................................................... approx.
Size ........................................................................................................
Battery ....................................................................................................
Battery voltage .......................................................................................
DC output ...............................................................................................
AC/DC adaptor input ..............................................................................
AC/DC adaptor output ............................................................................
Weight according EPTA-Procedure 01/2014
S ..........................................................................................................
M .........................................................................................................
L ..........................................................................................................
XL ........................................................................................................
2XL ......................................................................................................
Recommended ambient operating temperature ....................................
Recommended battery types .................................................................
Recommended charger .........................................................................
OVERVIEW
Battery holder pocket
Power button
To turn the heated base layer on, press the power button about 1
second.
Temperature setting of the heated base layer can be adjusted at any
time by pressing power button. Each press will cycle through the
heated base layer's temperature settings.
High Temp: red LED continuous
Low Temp: blue LED continuous
To turn off the heated base layer, press and hold the heated base
layer power button until the LED turns off (about 3 seconds).
If the heated base layer turns off unexpectedly, check connections
and charge the battery pack.
Power cable
Power cable port
Battery holder / charger
WARNING! Read all safety warnings and all instructions.
Failure to follow the warnings and instructions may result in electric
shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
SAFETY INSTRUCTIONS
Do not use this heated base layer with an infant, child, a helpless
person, or anyone insensitive to heat, such as a person with poor
blood circulation.
Never use if inner liner is wet.
Heating elements are not recommended to touch bare skin.
Shut off power immediately if discomfort occurs.
Do not allow the cords to be pinched.
If improper operation of this heated base layer is observed,
discontinue its use immediately and contact a MILWAUKEE service
facility for repair.
Do not use pins. They may damage the electric wiring.
Disconnect and remove battery pack and battery holder from battery
holder pocket before washing.
2 ENGLISH
L4 HBLB
............ 1,5 h / 3,0 h
...........S/M/L/XL/2XL
..................Li-Ion
................... 4 V
................... 4 V 8 W
........ 100-240 V ~ 50/60 Hz; 0.6 A max.
................... 5 V 2.1 A; 10,5 W .
............... 550 g
............... 570 g
............... 610 g
............... 650 g
............... 690 g
...........-18°C ... +50 °C
.............. L4B2, L4B3
............... L4 USBPS
Do not dry clean. Do not use drycleaning fluid on this heated base
layer. Do not bleach. Cleaning solvents may have a deteriorating
effect on the insulation of the heating element.
Do not iron.
Maintain labels and nameplates. These carry important information.
If unreadable or missing, contact a MILWAUKEE service facility for a
free replacement.
When storing the appliance, allow it to cool down before folding
Examine the appliance frequently for signs of wear or damage. If
there are such signs, if the appliance has been misused or does not
work, return it to the supplier before switching it on again.
This appliance must not be used by persons insensitive to heat and
other very vulnerable persons who are unable to react to
overheating.
Children under the age of three are not to use this appliance due to
their inability to react to overheating.
Do not crease the appliance by placing items on top of it during
storage.
WARNING: In order to avoid the possibility of heatstroke, disconnect
the clothing when moving to an environment having significantly
higher temperature.
Do not crease the appliance by placing items on top of it during
storage.
This appliance is not intended for medical use in hospitals
The appliance is not to be used by young children over the age of
three unless the controls have been pre-set by a parent or guardian,
or unless the child has been adequately instructed on how to
operate the controls safely.
Clean the appliance only with a damp sponge.
Do not dispose of used battery packs in the household refuse or by
burning them. Milwaukee Distributors offer to retrieve old batteries to
protect our environment.
Do not store the battery pack together with metal objects (short
circuit risk).
Use only System Milwaukee 4 V chargers for charging System
Milwaukee 4 V battery packs. Do not use battery packs from other
systems.
Never break open battery packs and chargers and store only in dry
rooms. Keep dry at all times.
Battery acid may leak from damaged batteries under extreme load
or extreme temperatures. In case of contact with battery acid wash it
off immediately with soap and water. In case of eye contact rinse
thoroughly for at least 10 minutes and immediately seek medical
attention.
No metal parts must be allowed to enter the battery section of the
charger (short circuit risk).
SPECIFIED CONDITIONS OF USE
The heated base layer may be used for warming up the body in cold
environments.
Do not use this product in any other way as stated for normal use.
OPERATION
If the heated base layer does not start or operate properly with a
fully charged battery pack, clean the contacts on the battery pack. If
the heated base layer still does not work properly, return the heated
base layer, charger and battery pack, to a MILWAUKEE service
facility for repairs.
BATTERIES
New battery packs reach full loading capacity after 4 - 5 chargings
and dischargings. Battery packs which have not been used for some
time should be recharged before use.
Temperatures in excess of 50°C (122°F) reduce the performance of
the battery pack. Avoid extended exposure to heat or sunshine (risk
of overheating).
The contacts of chargers and battery packs must be kept clean.
For an optimum life-time, the battery packs have to be fully charged,
after used.
To obtain the longest possible battery life remove the battery pack
from the charger once it is fully charged.
For battery pack storage longer than 30 days:
Store the battery pack where the temperature is below 27°C and
away from moisture
Store the battery packs in a 30% - 50% charged condition
Every six months of storage, charge the pack as normal.
TRANSPORTING LITHIUM BATTERIES
Lithium-ion batteries are subject to the Dangerous Goods Legislation
requirements.
Transportation of those batteries has to be done in accordance with
local, national and international provisions and regulations.
• The user can transport the batteries by road without further
requirements.
• Commercial transport of Lithium-Ion batteries by third parties is
subject to Dangerous Goods regulations. Transport preparation
and transport are exclusively to be carried out by appropriately
trained persons and the process has to be accompanied by
corresponding experts.
When transporting batteries:
• Ensure that battery contact terminals are protected and insulated
to prevent short circuit.
• Ensure that battery pack is secured against movement within
packaging.
• Do not transport batteries that are cracked or leak.
Check with forwarding company for further advice
LABEL
Please read the instructions carefully before starting
the machine.
Tumble dry low heat.
Do not bleach
Do not iron
Do not wring or twist
Do not dry clean
Not to be used by very young children (0-3 years)
0-3
Do not insert pins
Remove the battery and battery holder / charger
before washing
Do not dispose electric tools, batteries/rechargeable
batteries together with household waste material.
Electric tools and batteries that have reached the
end of their life must be collected separately and
returned to an environmentally compatible recycling
facility.
Check with your local authority or retailer for
recycling advice and collection point.
European Conformity Mark
UK Conformity Mark
ENGLISH 3