Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Step 9: Press the ice cube dispenser button (9) to obtain ice cubes; the indicator
will light up.
Place your container directly under the water or ice outlet.
Note: If ice cubes are stored in the appliance for a long time, they may freeze and stick to
each other, and in this case, no ice cubes will be ejected even if the dispenser is full. If so,
you can use the scoop provided in the device to break the ice first and then press the
dispense button (9).
Step 10: Press the crushed ice button
the appliance will stop crushing ice after 5 seconds.
WARNING
Please do not put your finger into the grinder.
:

Risk of injury!

Step 11: Press the water dispenser button (5) to obtain water.
Step 12: Press the ON / OFF button to turn off the device.
Step 13: Press the button on the left side of the device to get cold water.
Note: If you need cold water, please turn on the ice making function.
Make sure that your container is under the cold water outlet to avoid overflowing.
Step 14: If you need to remove the hose, replace it or use the drain plug, please remove
the blue ring to position A, then press the white ring (lock) on the outer side to position
B. The hose can be removed.
to crush the ice and distribute it. Press it again,
Water filling hose
EN-16

Publicité

Chapitres

Table des Matières
loading

Table des Matières