Summit FFBF279SSBI Mode D'emploi page 9

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

4. Remove the upper door from the middle hinge by carefully lifting the door straight up.
5. Place the upper door on a smooth surface with its panel facing upwards.
6. Loosen the self-tapping screw and remove the stop block and the door stopper. Install the
replacement door stopper (left) provided (in the plastic bag) and left stop block to the left side,
using the self-tapping screws. Keep the door stopper and right stop block for future use.
7. Use the Allen wrench (provided in the plastic bag) to loosen the screws used to fix the right
middle hinge, and remove the right middle hinge. Then remove the lower door.
8. Place the lower door on a smooth surface with its panel facing upwards. Loosen the self-tapping
screw and remove the stop block and door stopper.
9

Publicité

Chapitres

Table des Matières
loading

Table des Matières