Changing The Frequency Of The Camera - Luda Elektronik horseCam Guide D'utilisation

18. Changing the frequency of the camera

If you believe that interferences in the picture are not a result of unnecessary obstacles between
the antennas,we advise you to change the camera frequency. The horseCam camera can be
changed to any of the four radio frequencies to avoid possible interferences. Please take a look at
the illustrations to learn how the respective frequency can be set.
1. Slide the camera hood forward
2. Rotate the camera objective counter clock-wise.
3. Change the dip switches according to the illustration.
NOtE!
By changing the camera frequency you change the transmitting channel of the camera. If you
do this you also need to change the channel of the receiving part of the videoLink.
The transmitting channel of the camera and the channel of the receiving part of the videoLink
should always be the same.
Channel 1
2414MHz
Channel 2
2432MHz
Channel 3
2450MHz
Channel 4
2468MHz
- 46 -