Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
TECHNICAL REQUIREMENTS
Your microphone comes with a USB connector. The audio signal is sent from
the microphone to the computer through this connection. At the same time
the computer uses the USB connection to supply the microphone with the
necessary power. A connection is made by using the included USB cable with
type-B connector.
NOTE: Use only the included cable to ensure an optimal signal quality and a
reliable power supply. To operate the microphone, your computer needs to
meet the following system requirements:
Windows PC
Intel or AMD CPU, 1GHz or higher
minimum 512MB RAM
USB 2.0 interface
Windows XP/Vista/7/8/10
INITIAL OPERATION
Before you can use your microphone, connect it to a free USB port on your
computer. For initial operation of your microphone, complete the following
steps:
•
Power up your computer.
•
Connect your microphone to a free USB port on your computer
NOTE: Your operating system automatically installs the required drivers.
•
Select the microphone as input source in your preferred audio software
application.
Windows:
•
Adjust the recording level as required, using the Windows Volume Con-
trol panel. (Shortcut: Loudspeaker icon found in the taskbar)
•
Select the microphone in the pull-down menu of Sound recording by
clicking on Sounds and Audio Devices in the Control Panel and then
clicking the tab Audio
•
Mac OS:
•
Adjust the recording level as required, using Audio Midi Setup in Mac
OS.
Your microphone is now ready for use.
•
(Optional:) Select your microphone in the Audio Midi Setup in Audio
Devices-Tab as standard recording device.
Mac
G4/G5, 800MHz or higher
minimum 512MB RAM
USB 2.0 interface
Mac OS X 10.3.9 (Panther) or higher
EN
11
Publicité
Table des Matières
