Smoke hollow SH19031719 Mode D'emploi page 20

Assembly
31
31
3
20
27
27
27
31
31
12
26
Place (3) heat tents over the burners.
27
Place (4) cooking grates into their position in
the grill. Note: Grate openings MUST be placed
outside.
Place (1) firebox wood rack in bottom of firebox,
44
44
then place (2) firebox cooking grates into position
in firebox.
20
28
Place (1) control knob over the side burner
valve stem, making sure to align the flat
portion of the stem with flat portion in knob
and push control knob onto valve stem until
it is firmly seated.
29
Attach retaining wire to legs at left end of
grill. Position retaining wire inside legs and
under grill body with curved side up. Then
insert the ends of the wire through holes in
legs and rotate wire toward you as shown.
Install Heat Tents
Install Cooking Grates
and Firebox Wood Rack
Attach Control Knob
Attach Gas Cylinder Wire
Retainer