Smoke hollow SH19031719 Mode D'emploi page 19

Assembly
G
Fig. 23A
Fig. 24
C
Fig. 25A
G
G
G
4B
28
33
23
Grease Tray Assembly
Hardware needed:
Attach grease tray brackets to bottom of gas grill cabinet
using (4) M4x8 bolts. (Fig. 23A)
Place the removable grease tray into the grease tray tracks
as shown. (Fig. 23B)
Fig. 23B
4A
24
Charcoal Tray Assembly
Attach the charcoal tray onto the charcoal tray supporting
brackets. (Fig. 24)
Note: You can adjust the height of the charcoal tray
manually using the side wire hangers.
25
Install Warming Racks
C
Hardware needed:
Tighten (2) M6x35 bolts through the charcoal and gas grill
lids from the outside and position the warming racks so
that the bolts go through the wire loop on the warming
racks. (Fig. 25A)
Insert front wire legs into holes on each side of cabinet.
(Fig. 25B)
G
x4
4B
C
x4
Fig. 25B
19