Qlima RG10 Manuel D'utilisation page 24

1. ON/OFF - Turns the unit on or off.
2.
NOTE: Press together and
display between the ºC and ºF.
3. SET - Scrolls through operation functions as follows: Fresh > Sleep > Follow Me > AP mode > Self
clean... . The selected symbol will flash on the display area, press the OK button to confirm.
4.
5. FAN SPEED - Selects fan speeds in the following order: AUTO > LOW > MED > HIGH. NOTE: Holding this
button down for 2 seconds will activate Silence feature.
6. SWING - Starts and stops the horizontal louver movement. Hold down for 2 seconds to initiate vertical
louver auto swing feature.
7. MODE - Scrolls through operation modes as follows: AUTO > COOL > DRY > HEAT > FAN. NOTE: HEAT
mode is not supported by the cooling only appliance.
8. SLEEP - Saves energy during sleeping hours.
9. OK - Used to confirm the selected functions.
10. TIMER - Set timer to turn unit on or off.
11. SHORTCUT - Used to restore the current settings or resume previous settings.
12. CLEAN - Used to start/stop the Self Clean or Active Clean function.
13. LED - Turns indoor unit's LED display and air conditioner buzzer on and off (model dependent), which
create a comfortable and quiet environment.
14. TURBO - Enables unit to reach preset temperature in shortest possible time.
buttons at the same time for 3 seconds will alternate the temperature