Smartpond 71141 Mode D'emploi page 4

attendant units to ensure their maintenance and care in compliance
with the laws, directives and instructions laid down for this purpose. In
order to avert harmful contamination, we urgently recommend the user
to ensure cleaning and care of the water system and the water feature
including the nozzle, and to take all necessary measures to maintain
the technical units, such as pumps, tubing, connectors, under-water
lighting, and nozzles to keep them in functional order in line with safety
aspects. However, the maintenance and care obligation is not limited to
the technical products supplied, but encompasses the entire system.
We also recommend the owner to keep records of the dates when
maintenance and care was carried out, and to document all water
tests made in conjunction with the water feature. The owner is solely
responsible for guaranteeing the safety of the water feature. Use or
maintenance of the units sold and the system are beyond GeoGlobal
Partner's influence. GeoGlobal Partners can only be held liable for
manufacturing faults of smartpond® units.
WARNING
• Risk of electrical shock. This unit is supplied with a grounding
conductor and grounding–type attachment plug. To reduce the risk
of electric shock, be certain that it is connected only to a properly
grounded, grounding-type receptacle.
• Do not exceed the voltage shown on pump.
• Always disconnect unit from the power source before beginning any
maintenance or work on the unit.
• Inspect cord for damage before installation and/or maintenance.
Replace the entire pump assembly if damage is found.
• Do not remove the grounding pin from the power cord plug.
• Risk of electrical shock: This unit has not been investigated for use
in swimming pools or marine areas.
CAUTION
• This unit has been evaluated for use with fresh water only.
• Use a proper power source as indicated on the pump label.
• Keep the cord away from high temperatures or other heat sources.
• Do not pump heated liquids.
• Do not let the unit run dry. Unit must be completely submerged up to
the flotation ring for proper operation and cooling.
• Operate in fresh water only. Avoid heavily chlorinated water and
water with high pH levels.
• Do not lift the unit by its power cord.
• This light assembly has not been investigated for use in swimming
pools or hot tubs.
2
VISIT WWW.SMART-POND.COM FOR PRODUCT INFORMATION AND TIPS.