Using the AC Adapter
B
A
Before using the AC adapter A, remove batteries from pump unit. Plug AC
adapter into the pump unit B then plug the adapter into 100 – 240V AC
power only (standard household outlet). For use in countries outside of North
America, a plug converter (not included) may be required. Unplug the adapter
after each use.
Check the Fit of the Flange
The Advanced Double Electric Pump works with the Evenflo AdvancedFit™
Flange System. Additional sizes are available separately for purchase, allowing
you to find your best fit.
The AdvancedFit™ Flange System available sizes include:
• X-Small = 21.0mm (insert)
• Small = 24.5mm (insert)
• Medium = 28.0mm (insert)
WARNING
• DO NOT under any circumstances,
use this AC adapter with any other
equipment. Likewise, DO NOT use the
adapter from any other product on this
breast pump. If you lose the AC adapter,
contact Evenflo for a replacement.
• ALWAYS remove plug from product and
wall by pulling on the plug/housing.
DO NOT pull on the cord as this could
damage the cord.
• NEVER operate this product if it has a
damaged plug or cord.
• Large = 30.5mm (no insert)
• X-Large = 33.0mm (insert)
• XX-Large = 36.0mm (no insert)
10
Correct Flange Size Vs. Too Small or Too Large
A proper flange size is needed for comfort and to maintain your milk supply. As your
flange size can change several times throughout your journey, recheck your flange fit
frequently to ensure you are using the proper flange size.
FLANGE TOO SMALL
CORRECT FLANGE SIZE
While pumping, some
While pumping, your nipple
or all of your nipple rubs
should move freely in the
against the sides of the
breast flange tunnel. You
breast flange tunnel. Use
should see space around the
a larger size.
nipple. A minimal amount
of your areola is drawn into
the tunnel with the nipple.
IMPORTANT:
• DO NOT use the flange insert if your nipple is larger than the center opening.
• Your breast may change over time. Should this occur, choose a different size
for maximum comfort.
• Included flange sizes may not fit all breast and nipple sizes, but
additional sizes can be purchased separately. If you are having issues
after trying all included sizes, please contact our Parent's Ally Resource Center
for assistance.
1
To ensure a good seal, place the flange A gently,
but firmly, against your breast, with your nipple
directly in the center, as shown. Hold the bottle
A
upright to ensure that milk flows into the bottle.
Use the flange or appropriate flange insert that is
the most comfortable and seals against your breast
the best.
Note: Use only one soft flange insert per flange.
Pressing the flange too hard against your breast can
restrict milk flow.
Check the Fit of the Flange
FLANGE TOO LARGE
While pumping, more
areola is drawn into the
breast flange with your
nipple. Your areola may
rub against the side of the
breast flange tunnel. Use
a smaller size.
Using Your Breast Pump
11