Gas Component Checks - Real Flame Ojai Fire Column Manuel D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Gas Component Connection Checks
If the burner will not light or stay lit, please perform the following checks.
1.) Make sure the electrode wire is correctly connected.
Both electrode wires must be fully inserted into the igniter box.
2.) Make sure that the pilot housing is unobstructed.
Clear any debris on top of the pilot housing and make sure there is no debris
between the igniter pin, thermocouple and the burner tube.
Do not block
Pilot
opening
Housing
Pilot
Housing
Burner
Burner
INCORRECT
CORRECT
17

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

12544lp

Table des Matières