Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
IMPORTANT INSTRUCTIONS
When using electrical appliances, basic precautions should always be
followed to reduce the risk of fire, electric shock, and injury to persons,
including the following:
1. Read all instructions before in-
stalling or using this thermostat.
2. Use this thermostat only as
described in this manual. Any
other use not recommended by
the manufacturer may cause
fire, electric shock, or injury to
persons.
3. Do not insert or allow foreign
objects to enter any ventilation
or exhaust opening as this may
cause an electric shock or fire, or
damage the heater or thermostat.
SAVE THESE INSTRUCTIONS
If you are uncomfortable working with electricity, running electrical supply
wire or installing a circuit breaker, please consult a licensed electrician.
Unanswered questions? Call our technical support team at
888.346.7539.
Wire Strippers
• Verify power has been turned off before starting any work!
• Follow the instructions in your Hydronic Baseboard Owner's Guide (included with your
heater) until prompted to make thermostat connections.
wired on left
WORKING WITH ELECTRICITY
TOOLS REQUIRED
Volt Meter
TIPS BEFORE YOU BEGIN
PARTS OF YOUR THERMOSTAT
control knob
rounded corners to
front of heater
2
4. To disconnect thermostat turn off
power to heater circuit at main
disconnect panel.
5. Do not operate any thermostat
after it malfunctions. Disconnect
power at main disconnect panel
and have thermostat inspected
by a qualified electrician before
reusing.
6. A thermostat has arcing or spark-
ing parts inside. Do not use in
areas where gasoline, paint, or
flammable liquids are stored.
Wire
Connectors
Lorem ipsum
Phillips Screwdriver
wired on right
Publicité
Table des Matières
