Introduction; Weight Rating; Safety - Lippert Components Hitch-IT BikeBase/BikeWing Combo Unit Manuel D'installation Et Du Propriétaire

Introduction

BikeBase provides a system to transport two bicycles by
™
allowing a BikeWing ™ rack to be attached to the front of a
straight or A-frame style trailer tongue.
The BikeBase uses a pair of mounting plates that clamp
onto a trailer tongue tube up to 4" wide and 5" tall. The
BikeBase top plate features a tubing pocket into which the
BikeWing rack is bolted. The BikeBase works on a wide
range of utility, cargo, boat and toy trailers to utilize the
two-bicycle rack used with Jack-IT
The full BikeBase system is also compatible with Jack-IT's
Bump-IT ™ hitch shank accessory that plugs into a vehicle
using an adjustable aluminum adapter to haul the bicycles.
The BikeWing assembly can be taken from BikeBase and
secured to Bump-IT with the same pins that attached
BikeWing to BikeBase.
Quick facts:
• Adjustable clamping brackets fit A-frame and tongue
tubing from 2"-4" in width.
• NoMotion pins minimize wobble and can be padlocked
™
for security.
• BikeWing premium Zero-G system freezes bike motion
on the rack.
• 80-pound weight limit.
• Does not affect the trailer turning radius.
• Textured, powder-coated finish resists scratching.
• Package contains BikeBase accessory and mounting
hardware, BikeWing rack and two NoMotion pins with
safety clips.
Additional information about this product can be obtained
from lci1.com/support or by using the myLCI app.
Replacement kits can be ordered from
com/ or by using the myLCI app.
The myLCI app is available for free on iTunes
and iPad and also on Google Play
®
iTunes , iPhone , and iPad
® ®
Apple Inc. Google Play
™
Google Inc.
lci1.com
.
®
https://store.lci1.
for iPhone
®
for Android
™ ™
are registered trademarks of
®
and Android are trademarks of
™
574-537-8900
Hitch-IT
BikeWing
Installation and Owner's Manual
(For Aftermarket Applications)

Weight Rating

The maximum load weight of the BikeBase bicycle rack
system is 80 pounds.
DO NOT EXCEED MAXIMUM LOAD WEIGHT RATING.
THE BIKEBASE IS FOR USE ONLY WITH APPLICABLE
LIPPERT COMPONENTS AND LET'S GO AERO
AND CARGO RACKS.

Safety

THE "WARNING" SYMBOL ABOVE IS A SIGN THAT
AN INSTALLATION PROCEDURE HAS A SAFETY
RISK INVOLVED AND MAY CAUSE DEATH, SERIOUS
PERSONAL INJURY OR SEVERE PRODUCT OR
PROPERTY DAMAGE IF NOT PERFORMED SAFELY AND
WITHIN THE PARAMETERS SET FORTH IN THIS MANUAL.
MOVING PARTS CAN PINCH, CRUSH OR CUT. KEEP
CLEAR AND USE CAUTION.
®
users.
2
BikeBase
™
Combo Unit
™
CCD-0002231
/
™
BIKE
®
Rev: 01.03.19