Preparing The Battery - DHC BTW300 Manuel D'utilisation

2.4 Consider having someone nearby to
come to your aid when you work near a
lead-acid battery.
2.5 Have plenty of fresh water and soap
nearby in case battery acid contacts
your skin, clothing or eyes.
2.6 Wear complete eye and body
protection, including safety goggles and
protective clothing. Avoid touching your
eyes while working near the battery.
2.7 If battery acid contacts your skin or
clothing, immediately wash the area
with soap and water. If acid enters
3.

PREPARING THE BATTERY

WARNING WARNING
CORROSIVE SULFURIC ACID.
3.1 Be sure the area around the battery
is well ventilated while the battery is
being tested.
3.2 Clean the battery terminals. Be careful
to keep corrosion from coming in
contact with your eyes, nose and mouth.
3.3 Inspect the battery for a cracked or
broken case or cover. If the battery is
damaged, do not use the tester.
RISK OF
CONTACT WITH
BATTERY ACID.
BATTERY ACID
IS A HIGHLY
• 4 •
your eye, immediately flood the eye
with cold running water for at least
10 minutes and get medical attention
right away.
2.8 If battery acid is accidentally
swallowed, drink milk, the whites
of eggs or water. DO NOT induce
vomiting. Seek medical attention
immediately.
2.9 WARNING: This product contains one
or more chemicals known to the State
of California to cause cancer and birth
defects or other reproductive harm.
3.4 If the battery is not a sealed
maintenance-free battery, check the
level of each cell and if necessary,
add distilled water until the battery
acid reaches the level specified by
the manufacturer. This helps purge
excessive gas from the cells. Do not
overfill.
3.5 If it is necessary to remove the battery
from the vehicle to test it, always
remove the ground terminal from the
battery first. Make sure all accessories
in the vehicle are off to ensure you do
not cause any arcing.