Safety Instructions - Domo Premium DO2135HD Mode D'emploi

SAFETY INSTRUCTIONS

When using electrical appliances, basic safety precautions
should always be taken, including the following:
· Read all instructions carefully. Keep this manual for
future reference.
· Make sure all packaging materials and promotional
stickers have been removed before using the appliance
for the first time. Make sure children cannot play with
the packaging materials.
· This appliance is intended to be used in household and
similar applications such as:
staff kitchen areas in shops, offices and other
·
working environments;
· farm houses;
· by clients in hotels, motels and other residential
type environments;
· bed and breakfast type environments.
· Children should be supervised to ensure that they do
not play with the appliance.
· This appliance can be used by children aged from 16
years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience
and knowledge if they have been given supervision or
instruction concerning use of the appliance in a safe way
and understand the hazards involved. Children shall not
play with the appliance. Cleaning and user maintenance
shall not be made by children unless they are older than
16 and supervised.
· Keep the appliance and its cord out of reach of children
younger than 16 years.
· All repairs should be carried out by the manufacturer or
its aftersales service.
· Any injury or damage caused by failure to comply
with these rules are at your own risk. Neither the
manufacturer, importer, or the supplier may be held
liable.
I ELECTRICAL WARNINGS
· In order to avoid a hazard this appliance must not be
supplied through an external switching device, such as
a timer or a separate remote control, or connected to a
circuit that is regularly switched on and off by the utility.
· The appliance must be disconnected from its power
source when not in use, during service and when
replacing parts. Allow to cool before putting on or
taking off parts, and before cleaning the appliance. To
disconnect, turn controls to "OFF" or "0" position, then
25