Di4 JET PRESSING INFINITY Mode D'emploi page 21

OPERATING INSTRUCTIONS
NB: If it is the first time you have steam-ironed or if the product has not been used for some time,
turn the temperature control to a steam ironing position and press the steam button continu-
ously until steam comes out. This process can take a few minutes.
Place the Steam Station on a firm level table, bench or ironing board.
Plug the unit into a power outlet and switch on at the power point.
Adjust the temperature dial in terms of choose the kind of fabrics that you want to iron.
Note: If you want to use the steam ironing, we suggest you to adjust the temperature dial on MAX.
When the iron operating light indicator goes out the device will be ready for use.
Note: During the whole operating time, the iron operating light indicator will go on and off in erratic
intervals, this is normal.
To make the steam jet come out, press the steam button (C), and if you want to stop the steam press the
steam trigger (D), in a few seconds steam will stop.
If need lower steam rate, long press the power switch for 3 seconds, release the power switch to start
ECO mode (This mode is based on energy efficiency, the steam rate is lower). For ECO mode, all the
function is exactly the same as the normal mode, except the steam rate is smaller, If the user need to
exit to the normal mode, long press the power switch for 3 seconds and release the power switch; If
need to turn off the iron, please press the power switch.
Steam boost
In normal using the iron, press the steam trigger by 2 times in 1 second, and the iron will release a large
number of steam to form the steam explosion in 2 second.
Please wait for some seconds before repeating this operation.
Ironing Tips
• Start with the fabrics to be ironed at a low temperature and finish with those which need higher tem-
peratures.
• For mixed fibre fabric, set the ironing temperature to a lower setting.
• For woollen garments, press the steam trigger repeatedly over the garment without physically touch-
ing it with the iron.
• For thicker fabrics, raise the iron temperature.
• For low temperature setting, reduce the iron temperature.
Ironing Guide Chart
Below is a guide on the temperature setting required for different types of fabric, along with the recom-
mended iron method.
21