Bimar TF-37R Notice D'instructions page 18

-
Minimum speed (L) set: the fan runs at minimum speed for 30 minutes, and
then turns off.
Horizontal oscillation (right-left):this is done by pressing button "
remote control or the keypad. To stop the movement, press button (4) once again.
To turn the fan off press the "
panel, then unplug the plug from the mains.
If the appliance is not being used for long periods of time, remove the plug from
the plug point.
CLEANING AND MAINTENANCE
Attention: before normal cleaning, remove the plug from the socket.
 Clean the body with soft, slightly damp, cloth; do not use abrasive or corrosive
products.
 Do not immerse any part of the fan in water or other liquid: if this should happen,
do not put your hand in the liquid, but first remove the plug from the socket.
Carefully dry the appliance and make sure that all the electrical parts are dry: in
the case of doubt, ask for professionally qualified help.
 It is essential that the motor's air holes be kept from dust and lint.
 If the fan will not be used for long periods, it must be protected from dust and
humidity; we recommend storing it in its original packaging.
 Should you decide not to use the appliance any more, we recommend making it
inoperative by cutting the power cord (after making sure you have disconnected
the plug from the socket) and make dangerous parts harmless if children are
allowed to play with them.
 Do not dispose of non-biodegradable products in the environment but dispose
of them in accordance with current law. At the end of its working life, the
product must not be disposed of as urban waste. It must be taken to a special
local authority differentiated waste collection centre or to a dealer providing this
service. Disposing of a household appliance separately avoids possible negative
consequences for the environment and health deriving from inappropriate
disposal and enables the constituent materials to be recovered to obtain
significant savings in energy and resources.
" button on the remote control or the control
18/48
" on the