Whirlpool WED9620HC Guide De Démarrage Rapide

OPERATING INSTRUCTIONS
WARNING
Fire Hazard
No washer can completely remove oil.
Do not dry anything that has ever had any type of oil
on it (including cooking oils).
Items containing foam, rubber, or plastic must be
dried on a clothesline or by using an Air Cycle.
Failure to follow these instructions can result in
death or fire.
WARNING
Explosion Hazard
Keep flammable materials and vapors, such as
gasoline, away from dryer.
Do not dry anything that has ever had anything
flammable on it (even after washing).
Failure to follow these instructions can result in
death, explosion, or fire.
WARNING: To reduce the risk of fire, electric shock, or injury to persons,
read the IMPORTANT SAFETY INSTRUCTIONS, located in your
appliance's Owner's Manual, before operating this appliance.
Button Descriptions
1. POWER/CANCEL
Touch to turn the dryer on and off. Touch to stop/cancel a cycle at any time.
2. HOME
Touch this button and the LCD screen will show the home screen, where you
can select your cycle, settings, and options.
3. FAVORITES
Stores and accesses your favorite cycles, and also accesses a history of
recently run cycles.
4. LCD DISPLAY
Use this screen to select cycle, settings, options, etc. Swiping the screen gives
access to five frequently run cycles.
MODIFIERS
First select a cycle from the "What to Dry" (Automatic Cycles) and then select
the "How to Dry" to get the best combination cycle available for the type of
items you are going to dry. See the online "Cycle Guide" for more information.
Automatic Cycles
You can select a different dryness level, depending on your load. Touch Set Auto-
Drying Level; then touch the screen to choose between More, Normal, or Less to
adjust the dryness level at which the dryer will shut off. Dryness level can be changed
in the first 5–8 minutes of the cycle.
Automatic cycles give the best drying in the shortest time. Drying time varies based on
fabric type, load size, and dryness setting.
NOTE: Automatic Cycles will give you up to 4 temperatures to adjust and it varies,
depending on the "What to Dry" or "How to Dry" selections that have been made.
Timed Dry
When you select Timed Dry, the default time appears in the display. To change the
drying times, touch Timed Dry or Quick Dry, then touch the screen to choose a new
drying time. Touch Temperature then the screen to adjust the default temperature.
Wrinkle Shield™ Option
If you will be unable to remove a load immediately, touch Wrinkle Shield
to 150 minutes of periodic tumbling to help reduce wrinkling. Touch Wrinkle Shield
option, then touch "ON" to activate this option. Wrinkle Shield
at any time by touching the "X" on the touch screen to the right of the estimated time
remaining.
OPTIONS
From the home screen, touch the Options icon (at upper right of screen) and the
Options screen will show Static Reduce, Damp Dry Signal, and/or EcoBoost
(depending on the cycle).
NOTE: Not all options and settings are available with all cycles.
Damp Dry Signal
Touch to select the Damp Dry Signal on or off. When selected, a series of beeps will
sound when the load is damp, but not completely dry. This will allow you to take
clothes out of the load that do not need to dry completely. The Damp Dry Signal is
selected as a default for the Bulky Items cycles, as a reminder to manually reposition
bulky loads midway through the cycle. This option is not available for all cycles. See
the online "Cycle Guide" for details.
W11356338A
W11356666A-SP
Dryer Quick Start Guide
Step 1. Clean Lint Screen
Step 2. Load Clothes; then Close
Door
Step 3. Power On/Cancel
Step 4. Select Cycle and Settings
Step 5. Press Start/Pause
NOTE: The control panel features a sensitive surface that responds to a light touch of your finger. To ensure your selections are registered, touch the control
panel with your finger tip, not your fingernail. When selecting a setting or option, simply touch its name.
Static Reduce (on some models only)
Touch to add this option to selected Automatic Cycles. The dryer will
automatically tumble, pause, and introduce a small amount of moisture into
the load to help reduce static. This option adds approximately 3 minutes to
the total cycle time.
EcoBoost™ Option
Touch to activate the EcoBoost
energy savings by using a slightly lower heat level. This will increase dry
times. The EcoBoost
and defaults on.
5. REMOTE ENABLE
Press the Remote Enable button any time you want to use the WiFi app.
Pressing the button locks out the LCD screen and you will be prompted with a
message about the dryer waiting for input from the app. To exit this mode,
press the Remote Enable button again.
™
to add up
6. TOOLS
™
The Tools button gives access to many other settings, utility cycles,
™
option may be ended
preferences, and information. Touch the Tools button to access the Tools
screen. Scroll down with your finger to access all of the selections.
Control Lock
Press this icon to lock the controls. Swipe up to unlock.
™
Mute
Press this icon to mute or unmute sounds.
UTILITY CYCLE
Steam Refresh
Select Steam Refresh to reduce odors and light wrinkles in dry loads
consisting of wrinkle-free cotton, cotton-polyester blends, common knits, and
synthetics. If you will be unable to remove a load immediately, touch Wrinkle
™
Shield to add up to 150 minutes of periodic tumbling. You may select the "+
Steam" setting to add a short steam cycle after 60 minutes to help smooth out
wrinkles.
Cycle Guide — Normal Cycle
This dryer has a unique user interface to help you select the best cycle you need for your load. The "What to Dry"
"How to Dry" layout guides you to the optimal cycle in two easy steps: First determine what items are in the load
that you are trying to dry. Use that to guide your "What to Dry" selection. Then determine how you want the dryer to
dry them and select the appropriate "How to Dry" selection. Modifiers are preset for the items being dried, but can
be changed if desired.
To get the most energy savings and enhanced fabric care from your dryer, use the Automatic cycles. These cycles
measure the drying air temperature and moisture levels to turn the dryer off once the load reaches the selected
dryness level. Dryer performance and results may vary with service voltage less than 240.
Items to Dry: "What to Dry":
T-shirts, Lingerie, Regular, Delicate,
Blankets, White Bulky Items,
Napkins, Athletic, Dish Whites, Colors,
cloths Towels
NOTE: Government energy certifications for this model were based on the Regular + Normal Cycle, Highest
temperature setting, Normal Dryness Level, EcoBoost
Government Energy Certification Settings except the default Temperature Setting of Medium was adjusted to the
Highest temperature setting.
Online Ordering Information
For detailed installation instruction and maintenance information, winter storage, and transportation tips, please
see the Owner's Manual included with your machine.
For information on any of the following items, a full cycle guide, detailed product dimensions, or for complete
instructions for use and installation, please visit https://www.whirlpool.com/owners, or in Canada
https://www.whirlpool.ca/owners. This may save you the cost of a service call.
However, if you need to contact us, use the information listed below for the appropriate region.
United States:
1–800–253–1301
Whirlpool Brand Home Appliances
Customer eXperience Center
553 Benson Road
Benton Harbor, MI 49022–2692
Not all features, cycles, and options are available on all models. Appearance may vary.
™ option, which allows you to increase your
™ option is only available on the Regular/Normal cycle
"How to Dry": Description:
Normal
Automatic Sensor Cycle stops when
dryness level is reached.
™
On. The as-shipped defaults were the same as the
Canada:
1–800–807–6777
Whirlpool Brand Home Appliances
Customer eXperience Centre
200–6750 Century Ave.
Mississauga, Ontario L5N 0B7
Preferences
Press to access Times and Dates, Sound Volume, Display Settings, and
Regional. Follow the screen prompts.
WiFi
Touch and hold WiFi Connect for 3 seconds during the initial connection of
the dryer to your home Wi-Fi network. If the dryer is in a Smart Delay, touch
WiFi Connect to override the delay and begin a dry cycle immediately.
Info
Press to access Service & Support, Store Demo Mode, Restore Factory, WiFi
Terms and Conditions, and Software Terms and Conditions. Follow the
screen prompts.
7. START/PAUSE
Touch and hold to start, or touch to pause a cycle. When the dryer drum
begins to move, release the Start/Pause button. Continuing to hold the Start/
Pause button after the dryer has started will cause the dryer to stop.
Internet Connectivity Guide
Connectivity requires Wi-Fi and account creation. App features and
functionality subject to change. Data rates may apply. Once installed, launch
the app. You will be guided through the steps to set up a user account and to
connect your appliance. If you have any problems or questions, call
Corporation Connected Appliances at 1–866–333–4591.
Whirlpool ®