Suction Function; Blow Function; Switching On/Off; Operating Instructions - Deltafox DC-AVE 1218 Traduction De La Notice D'utilisation Originale

When fitting the container cover
(7), you must ensure that the on/off
switch (
ture (8) are roughly aligned to each
other or the container cover cannot
be put on correctly.

Suction function

1. Insert the rotatable plastic end piece
(10a) into the suction aperture (8).
Make sure that the protrusions on the
plastic end piece are guided through
the grooves in the suction aperture (8).
2. Turn the plastic end piece (10a) in the
clockwise direction to tighten (bayonet
fitting).
When assembling/detaching the
suction hose (10), hold the black
plastic end piece (10a) and not
the suction hose (10). Twisting or
bending could damage the hose.
Suction tube:
Plug the suction tube (11) onto the rigid
end piece of the suction hose (10).

Blow function

1. Press the blowing aperture adapter
( 12) into the blowing aperture (2).
2. Turn the blowing aperture adapter
( 12) in a clockwise direction to
tighten.
3. Insert the rotatable plastic end piece
(10a) into the blowing aperture
adapter ( 12). Make sure that the
protrusions on the plastic end piece
are guided through the grooves in the
blowing aperture adapter (
6) and the suction aper-
12).

Switching on/off

Connect the mains plug.
The appliance is equipped with a
safety switch (
operation only if the folded
filter ( 13) is fitted correctly.
Switching On:
On/Off Switch (see
Switching Off:
On/Off Switch (see

Operating Instructions

The vacuuming of glowing em-
bers and of materials that are
combustible, explosive or harm-
ful to health is prohibited. There
is a risk of injury!
• Place the equipment on a level sur-
face that is not heat sensitive.
• Always use the suction tube (
for vacuuming. In case of minor con-
tamination, hold the suction tube
( 11) approx. 1 cm above the ash.
Remove large ash volumes by directly
immersing the suction pipe.
• Vacuum only cooled ash at less than
40 °C.
• When vacuuming, keep checking the
metal container (
hose ( 10) for rises in temperature.
• In the event of a rise in temperature,
switch off the equipment and discon-
nect at the plug. Place the equipment
outside and monitor it as it cools.
• Always use the carry handle (
transporting the equipment.
• The metal container (
filled to no more than half, so the
GB
15) that permits
6) In position "I"
6) In position "0"
11)
9) and suction
5) for
9) may be
19