Trouble Shooting; Fault Correction - Deltafox DC-AVE 1218 Traduction De La Notice D'utilisation Originale

GB

Trouble shooting

Problem Possible cause
Mains voltage is not present
The equipment is not switched on
Device does
not start
Safety stop due to missing or incor-
rectly inserted pleated filter (
Defective on/off switch (
Defective motor
Suction hose (
tube (
Metal container (
Low or lack
Metal container (
of suction
Pleated filter (
Air filter (
22
10) or suction
11) blocked
9) is not closed
9) is full
13) is clogged
16) is clogged

Fault correction

Check plug socket, power cord, line,
plug and fuse, where appropriate,
repair through electrical specialist
Switch on the equipment (see
"Switching on/off")
Insert the pleated filter correctly
13) (see "Cleaning/Maintenance")
6)
Repair through customer service
Remove obstructions and blockages
Close the metal container
Empty the metal container (see
"Cleaning/Maintenance")
Clean or replace the pleated filter
(see "cleaning/maintenance")
Clean the air filter
(see "Cleaning/Maintenance")