Initial Setup; Using The Tv Controller - Samsung QN49Q70R Mode D'emploi

04 Initial Setup

When you turn on your TV for the first time, it immediately starts the Initial Setup. Follow the instructions displayed on
the screen and configure the TV's basic settings to suit your viewing environment.
• To perform the Initial Setup using the SmartThings app, you must connect your mobile device via Wi-Fi.
• If the pop-up for setup does not appear automatically in the SmartThings app on your mobile device, manually add
the TV using Add Device on the dashboard of the SmartThings app, and then continue with the set up process.
• The SmartThings app is available for mobile devices running Android 6.0 or higher or iOS 10 or higher.
• Noise may occur temporarily when the TV communicates with mobile devices.

Using the TV Controller

You can use the TV Controller on the bottom of the TV instead of the remote control to control most of the functions
of your TV. While watching TV, you can change the channel by pressing the up and down directional buttons on the
TV Controller or adjust the volume by pressing the left and right directional buttons. Press the
Controller to display the Control menu.
To run an item on the menu, press the directional buttons on the TV Controller to move the focus to the item, and then
press the button on the TV Controller.
• The screen may dim if the protective film on the SAMSUNG logo or the bottom of the TV is not detached. Please
remove the protective film.
Control menu
: Smart Hub
: Settings
: Return
TV Controller / Remote control sensor
• Press button: Display the Control menu. / Select or run a
focused item on the menu.
• Press and hold button: The running function is terminated.
• Up/Down button: Changes the channel.
• Left/Right button: Changes the volume.
The TV Controller is located on the bottom of the TV.
button on the TV
: Source
: Power Off
English - 13