Operation - Beurer janosch JBY 92 Mode D'emploi

7

operation

1. Position the baby unit so that it is in an elevated position and is
not in proximity to any other devices that may cause interfer-
ence. Switch the baby unit on with the POWER/VOL button. The
power LED of the baby unit lights up.
2. Fasten the parent unit to your arm or position it in the room in
which you are located.
3. Switch the parent unit on with the
power LED of the parent unit lights up.
If there is no connection between the devices (baby unit not
switched on or out of range), an acoustic warning will sound
on the parent unit (2 beeps).
talk function
This baby monitor features a two-way communication function.
Press the TALK button and keep it pressed while you are talking to
your baby.
mobile handset search – paging function
If you have mislaid or accidentally hidden the parent unit, you can
locate it via an acoustic signal by pressing the PAGE button on the
baby unit.
This function is available only if the parent unit is switched
on.
POWER/VOL button. The
25