Refuelling - AL-KO 2500-C Notice D'utilisation

Do not use bare wires for the connection with
electric devices - always use compatible cables
and plugs
Observe maximum cable length when using exten-
sion cords or a mobile power distribution cabinet
Observe maximum cable length when using
extension cords or a mobile power distribution
cabinet
for 1.5 mm max. 60 m
2
for 2.5 mm max. 100 m
2

Refuelling

The machine must be refuelled prior to start-up.
Operating material
Petrol
Regular petrol /
Grade
unleaded
see Technical
Filling
data
amount
Safety
Warning!
Never run the engine in enclosed spaces. Danger
of poisoning!
Use only designed containers to store petrol and oil
Add and empty petrol and oil outdoors only with the
engine cooled down
Do not add petrol or oil with the engine running
Do not smoke when refuelling
Do not open the tank cap when the engine is run-
ning or hot
Replace the tank or tank cap if damaged
If petrol has leaked out:
Do not start the engine
Avoid start attempts
441152_c
If engine oil has leaked out:
Drop off waste oil in a closed container at a recycling
centre or a customer service centre.
Engine oil
Refuelling
see (
3)
Filling with petrol (
see Technical
Unscrew the tank lid and store it in a clean place.
data
1. Fill with petrol via a funnel.
2.
Filling with engine oil ( 4)
3. Fill with engine oil via a funnel.
4.
Clean the machine
trol to avoid spilling
Spilled fuel can lead to damage to plastic parts.
Immediately wipe off fuel. Warranty does not
cover damage to plastic parts caused by fuel
Do not start the engine
Absorb leaked engine oil using an oil binding
agent or cloth and dispose properly
Clean the machine
Do not dispose of waste oil:
in domestic waste
by pouring it into the canalisation, drain, or
onto the ground
2)
GB
-
19