Range Hood Care - arietta AVN430SSA Guide D'instructions D'installation

Range Hood Care

Cleaning
IMPORTANT: Clean the hood and grease filters frequently
according to the following instructions. Replace grease filters
before operating hood.
Exterior Surfaces:
To avoid damage to the exterior surface, do not use steel wool or
soap-filled scouring pads.
Always wipe dry to avoid water marks.
Cleaning Method:
• Liquid detergent soap and water, or all-purpose cleanser
• Wipe with damp soft cloth or nonabrasive sponge, then rinse
with clean water and wipe dry.
• Do not use cleaning agents containing bleach.
All manuals and user guides at all-guides.com
Aluminum Grease Filter:
1. Remove the filter by pulling the spring release handle and
2.
3.
4.
Push up on aluminum filter and release handle to latch
Replacing a LED Lamp
The LED lights are replaceable by a service technician only. See
the service contact information in this page below.
9
then pulling down the filter.
A
A. Spring release handle
Wash aluminum grease filters as needed in dishwasher
or hot detergent solution.
Reinstall the filter by making sure the spring release
handles are toward the front. Insert aluminum filter into
upper track.
Push in spring release handle.
into place.