Pin Value - Kübler SMCB Instructions D'utilisation

5.7. PIN Value

Normally the SMCB-Display is delivered without a PIN, respectively with PIN
Value = 0000. In this case the PIN Value request after initialization is skipped.
If needed, the unit can be protected from unauthorized access when creating
an individual PIN by stepping through the following menu items:
Display Unit
Please enter an individual 4 digit PIN and press OK to confirm the entrees.
After OK, the changed PIN must be saved in order to protect the SMCB-
Display unit with the new PIN after the next power-on (see chapter 0).
The PIN request is also usable as keypad interlock function.
If the PIN is lost, you can enter the emergency pin 6079.
Doc. # R60718

Edit Data
To enable the SMCB-Display keypad, the PIN
must be entered and confirmed with OK.

Unit Settings
Electrical Connections

PIN Value
EN - 19