Display 4: Scaled Input 2 - Kübler SMCB Instructions D'utilisation

5.1.4. Display 4: Scaled Input 2

Examples about the indication of speed, rotational speed, production rates, ...
see chapter 7.
For information's about error messages in the status-line see chapter 8.
*) If the version of the safety device is lower 04A, these parameters are in
SMCB-Display.
The maximum display value is +/- 999 999 999.
Doc. # R60718
In this display, the respective input frequency of
sensor2 is converted according to its adjusted
parameters („OPU-Menu" in safety device) and
shown in the display. *) See chapter 6.1
Electrical Connections
EN - 10