Faults; Technical Data; Declaration Of Conformity; Contact - Honeywell Krom Schroder PFP 700 Instructions De Service

Faults

WARNING
Electric shocks can be fatal! Before working on
possible live components ensure the unit is discon-
nected from the power supply.
Fault-clearance must only be undertaken by au-
thorised, trained personnel.
? Faults
! Cause
■ Remedy
? Red LED lights up on PFP 700 – 24 V DC
output is switched off.
! Overload at terminals 8ace – 12ace:
current > 600 mA.
■
Check wiring, reduce load.

Technical data

Front width 8 depth units = 40.6 mm,
Overall height 3 height units = 128.4 mm.
Ambient temperature:
-20°C to +60°C.
PFP 700
Mains voltage:
110/120 V AC, -15/+10%, 50/60 Hz,
220/240 V AC, -15/+10%, 50/60 Hz.
Power consumption:
PFP 700: 25 VA.
Output load:
24 V DC, 600 mA, short circuit-proof,
output rating 14 VA, PFP 700 switches off in the
event of an output overload.
Fine-wire fuse: 0.315 A, slow-acting L, pursuant to
IEC 127-2/3.
Weight: approx. 0.75 kg.
PFR 704
Input voltage: 3 inputs per relay,
110/120 V AC, -15/+10%, 50/60 Hz,
220/240 V AC, -15/+10%, 50/60 Hz,
24 V AC/DC, ± 10%.
Power consumption per relay: 25 mA.
Contact rating of floating outputs:
max. 2 A, 264 V (not fused internally).
Weight: 0.17 kg.

Contact

If you have any technical questions, please contact
your local branch office/agent. The addresses are
available on the Internet or from Elster GmbH.
We reserve the right to make technical modifications
in the interests of progress.

Declaration of conformity

We, the manufacturer, hereby declare that the prod-
ucts labelled accordingly comply with the essential
requirements of the following Directives and Stand-
ards:
– Gas Appliances Directive (90/396/EEC) in con-
junction with EN 298,
– Low Voltage Directive (2006/95/EC) in conjunction
with the relevant standards,
– Electromagnetic Compatibility Directive (2004/108/
EC) in conjunction with the relevant standards
relating to radiation,
– designed for applications pursuant to Directive
98/37/EC.
Comprehensive quality assurance is guaranteed by
a certified Quality System pursuant to DIN EN ISO
9001 according to annex II, paragraph 3 of Directive
90/396/EEC.
Elster GmbH
Elster GmbH
Postfach 28 09, D-49018 Osnabrück
Strotheweg 1, D-49504 Lotte (Büren)
T +49 541 1214-0
F +49 541 1214-370
info@kromschroeder.com, www.kromschroeder.com
8