Installation - HAMPTON BAY BPT18-34ALE-1 Guide D'utilisation Et D'entretien

Installation

1
Determining joist width
Measure the distance from the center of the two ceiling
joists where you will be installing the ventilation
fan.
2
Suspension bracket installation
□ For ceiling joist installations under 20 in., insert
suspension bracket I (D) into the fan body (A).
Proceed to step 3.
□ For ceiling joist installations between 20 in. and 24
in., insert suspension brackets I (D), II (E), and III
(F). Proceed to step 4.
NOTE: Sliding hanger bars are provided to allow for
accurate positioning of the main body between joists.
3
Joint installation under 20 in.
□ Use four long wood screws (BB) to attach the main
body of the fan to the ceiling joists.
□ Ensure the main body is level and square to the
joists.
□ Tighten all screws.
CAUTION: Do not mount the fan flush against the joist. The
flange should be flush with the ceiling board.
7 Please contact 1-877-527-0313 for further assistance.
www.hamptonbay.com