pico Technology PicoScope 3000 Guide De Démarrage page 12

Pico Technology
The top tool bar gives you all the frequently used controls for the oscilloscope. The first
group of buttons on the left of the toolbar opens different windows:
Opens a new oscilloscope window
Opens the spectrum analyser window
Shows the readings in a meter view.
Both channels are controlled by
the timebase drop-down menus:
The timebase menus control the amount of time that the trace takes to travel
horizontally across one square on the grid. The first drop-down menu selects the amount
of time taken to travel through one square when the horizontal zoom factor is set to x1.
The second drop-down menu selects the horizontal zoom factor.
The PicoScope 3223 PC Oscilloscope has two channels: A and B. The 3423 variant has
two further channels: C and D. Each channel is controlled by its own set of controls in
the top toolbar:
DO110-4
Oscilloscope Diagnostics Kit Quick Start Guide
5