Installation Guidelines - INVENTOR IW14BL Mode D'emploi

Interior Dimensions
*The above prices
may be subject to deviation. Kindly
refer to the purchased product.

7. INSTALLATION GUIDELINES

Position
Upon the positioning of this unit, keep in mind the floor must be flat and sturdy and the room
should be well ventilated, without additional heating sources nearby.
.
2
Wait at least 4 hours before
connecting the appliance to the
power supply, thus, allowing all
fluids to settle in the compressor.
EN
(mm)
400
200
180
405
230
.
1
Allow sufficient air ventilation
surrounding the unit. The rear
end (backside) of this appliance
should stand against a wall
allowing sufficient air ventilation
as follows:
➟ 20cm from the top
➟ 15cm from the back
➟ 40cm from the rest sides
100
20
9