Reversible Door - INVENTOR IW14BL Mode D'emploi

Masquer les pouces Voir aussi pour IW14BL:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 67

Reversible Door

The door opening can change from either the left or the right side, according to what is best
suited for its location. Ensure there is enough adequate space for the door to open fully
(90 degrees). To change the door opening direction, please follow the mentioned below
instructions:
Required tools:
Head Screwdriver / Slot head Screwdriver / Hexagonal Spanner
• Before reversing the door swing, unplug the appliance from the power supply and
remove goods from fridge.
2.
Remove the plastic cover located on
the top right or left (depending on initial
door installation side) of the door hinge,
and unscrew the two screws with the
stabilizing pin.
10
1.
Adjust the two leveling feet to their highest
position. Tilt the unit slightly backwards to take the
door off. Rest the unit on something solid so that it
will not slip during the door reversing process.
Do not lay the unit flat as this may
damage the coolant system.
3.
Slightly tilt so that you may have access
to the front bottom bracket. Unscrew
the two screws located on the bottom
left or right (depending on initial door
installation side) and remove the foot
from the opposite side. Once top and
bottom screws and also the opposite foot
are removed, the door will be completely
released.
EN

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Iw14bl-bsIw14blecIw16blIw16bl-bs

Table des Matières