High Altitude Users; Smart Kettle Sounds; Adjusting Lid Tightness; Boil-Dry Protection - cosori CS108-NK Manuel Utilisateur

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

High Altitude Users

At higher elevations, water boils at a lower
temperature. You may need to use a
different preset.
Altitude
1,183–2,820 m /
3,881–9,255 ft
2,821 m / 9,256 ft
and above

Smart Kettle Sounds

The kettle will alert you by beeping 3
times when the water reaches the preset
temperature. The alerts can be turned off in
the product settings on the VeSync app. The
kettle will also beep once when plugged in or
when boil-dry protection is activated.

Boil-Dry Protection

Your kettle is equipped with boil-dry
protection. If there is less than 118 mL /
½ US cup of water in the kettle, the heat will
automatically shut off. Allow the kettle to cool,
then add more water before using again.
If all buttons blink and the kettle beeps,
remove the kettle from the base and let it cool.
Preset for
Boiling Water
205°F COFFEE
195°F OOLONG

Adjusting Lid Tightness

If you feel the kettle lid fits too loosely or
is too hard to take off, you can adjust the
tightness of the lid.
1. Take off the lid.
2. Use a tool to adjust the 3 tabs on the
Figures 1.1-1.2
kettle lid. [
a. If you push the tabs in, the lid will
fit more loosely, and will be easier
to put on and take off.
b. If you pull the tabs out, the lid will
fit more tightly, and will not come
off as easily.
3. After adjusting the tabs, put the lid back
on and take it off again to see if the fit is
correct. If not, adjust the tabs again until
the lid fits the way you prefer.
Figure 1.1
Figure 1.2
EN
]
11

Publicité

Table des Matières
loading

Table des Matières