Connections; Connecting The Network; Connecting Audio; Connecting Alarms - Videor Eneo ISD-55P0010P0A Guide D'installation Rapide

No. Connector
1 RJ-45
2 DC Jack
AI: Alarm In
3 G: GND
AO: Alarm Out
MIC: Audio In
4
G: GND
SPK: Audio Out
5
G: GND

Connections

Connecting the Network

Connect a standard RJ-45 cable to the network port of the camera. Generally a crossover
cable is used for directly connection to PC, while a direct cable is used for connection to a
hub. You can also use a router featuring PoE (Power over Ethernet) to supply power to the
camera.

Connecting Audio

Connect speaker to audio output line and external mic to audio input line.

Connecting Alarms

AI (Alarm In)
You can use external devices to signal the dome camera to react on events. Mechanical or
electrical switches can be wired to the AI (Alarm In) and G (Ground) connectors.
8
Description
Ethernet, RJ-45 port compatible with 10/100Mbps having PoE functionality
Main Power, DC Jack, 12 VDC
Alarm input and output, 3-pin terminal
Audio line input, 2-pin terminal
Audio line output, 2-pin terminal