Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Installation
Installation
For the operation of the Network Camera, it is necessary to connect a network cable for
data transmission, power connection from supplied power adapter. Depending on opera-
tion methods, it is possible to connect an alarm cable additionally.
The dome camera should be attached to a structural object, such as hard wood, wall stud
or ceiling rafter that supports the weight of the dome camera. For its fixation on different
locations, please consult with an installer.
Installing and Adjusting Camera
1. Make screw holes for the camera on the ceiling with Template Sheet.
2. Disassemble Camera Cover from the camera.
3. Fix the camera set using Anchors (3x) and Screws (3x) to the ceiling.
6
Template sheet
Top case
Bottom case & camera
Publicité
Chapitres
Table des Matières
